一种基于极大似然估计的信号盲抽取算法

针对盲信号抽取问题,根据极大似然估计原理,给出一种基于极大似然估计的分步盲抽取算法。根据信号不同的延时特性确立抽取信号,完成第一步抽取。由于初步抽取信号存在噪声污染,根据极大似然估计,估计抽取信号的概率密度函数,确立优化代价函数,利用自然梯度方法进行优化,确立最终抽取向量迭代方式,完成对抽取信号优化处理。通过仿真证明算法具有良好的收敛性和抗噪性,在SNR17 d B时,抽取信号与源信号的相似度达到95%。     

一种高动态低信噪比卫星导航信号捕获方法

为提升高动态低信噪比环境下卫星导航信号的捕获性能,提出了一种基于分数阶傅里叶变换(FrFT)及部分匹配滤波(PMF)的捕获方法。在该方法中,接收机首先利用PMF对接收信号做分段相干积分,随后借助快速傅里叶变换(FFT)对分段积分结果做离散快速FrFT,最后通过检测FrFT输出的峰值完成信号的捕获。由于具有多普勒频率变化率的卫星导航信号在FrFT后呈现能量聚焦特性,所提方法能够显著提高信号的长时间相干积分增益。同时对所提算法的捕获概率、平均捕获时间以及算法复杂度等性能指标进行了理论分析及计算机仿真验证。仿真表明,与传统的PMF-FFT方法相比,所提方法能够通过延长相干积分时间的方式有效提升高动态低信噪比卫星导航信号的捕获概率、降低捕获时间。     

基于小波包变换及相关系数法的复合材料层合板冲击位置识别研究

复合材料较为广泛应用于航空、航天等工程领域,但对冲击载荷十分敏感。因此,对复合材料结构承受的冲击载荷进行在线监测以及冲击位置的实时识别具有重要意义。文章以复合材料层合板为研究对象,基于两个冲击位置的距离越靠近则接收到信号幅频特性相似度越高的特点,采用FBG光纤光栅传感器,通过小波包变换的方法来提取能量特征向量,同时结合相关系数法来实现复合材料层合板的冲击位置识别。在480 mm×480 mm的复合材料层合板上开展冲击实验,8次实验皆完成了冲击位置识别,其中7个点距离误差为0 mm,实现精准识别,另一个点误差在6%以内。     

Multi-state autonomous drilling for lunar exploration

Due to the lack of information of subsurface lunar regolith stratification which varies along depth, the drilling device may encounter lunar soil and lunar rock randomly in the drilling process. To meet the load safety requirements of unmanned sampling mission under limited orbital resources, the control strategy of autonomous drilling should adapt to the indeterminable lunar environments. Based on the analysis of two types of typical drilling media (i.e., lunar soil and lunar rock), this paper proposes a multi-state control strategy for autonomous lunar drilling. To represent the working circumstances in the lunar subsurface and reduce the complexity of the control algo-rithm, lunar drilling process was categorized into three drilling states:the interface detection, initi-ation of drilling parameters for recognition and drilling medium recognition. Support vector machine (SVM) and continuous wavelet transform were employed for the online recognition of dril-ling media and interface, respectively. Finite state machine was utilized to control the transition among different drilling states. To verify the effectiveness of the multi-state control strategy, drilling experiments were implemented with multi-layered drilling media constructed by lunar soil simulant and lunar rock simulant. The results reveal that the multi-state control method is capable of detect-ing drilling state variation and adjusting drilling parameters timely under vibration interferences. The multi-state control method provides a feasible reference for the control of extraterrestrial autonomous drilling.     

DME Interference mitigation for L-DACS1 based on system identification and sparse representation

L-band digital aeronautical communication system 1 (L-DACS1) is a promising candi-date data-link for future air-ground communication, but it is severely interfered by the pulse pairs (PPs) generated by distance measure equipment. A novel PP mitigation approach is proposed in this paper. Firstly, a deformed PP detection (DPPD) method that combines a filter bank, correlation detection, and rescanning is proposed to detect the deformed PPs (DPPs) which are caused by mul-tiple filters in the receiver. Secondly, a finite impulse response (FIR) model is used to approximate the overall characteristic of filters, and then the waveform of DPP can be acquired by the original waveform of PP and the FIR model. Finally, sparse representation is used to estimate the position and amplitude of each DPP, and then reconstruct each DPP. The reconstructed DPPs will be sub-tracted from the contaminated signal to mitigate interference. Numerical experiments show that the bit error rate performance of our approach is about 5 dB better than that of recent works and is closer to interference-free environment.     

同步误差条件下的空间目标双基地ISAR自聚焦算法

以空间目标为研究对象，针对双基地雷达时间、空间及频率同步误差导致的逆合成孔径雷达图像散焦问题，提出基于离散多项式相位变换的自聚焦算法。算法首先将目标平动、转动及同步误差导致的相位项统一建模为高阶多项式，利用离散多项式相位变换方法估计高阶多项式系数并据此构建补偿相位项，完成高阶相位补偿。最后进行方位压缩得到高聚焦度的二维ISAR像。算法通过选取合适的延时参数及成像积累时间可得到高精度参数估计及相位补偿，理论分析和仿真校验了算法性能优于常用的非参数化自聚焦算法。     

缺口件疲劳寿命预测新方法

采用有限元方法针对缺口件多轴疲劳实验结果进行模拟。结果表明,相同路径条件下,随着缺口半径减小缺口根部附近的应力梯度显著增加。基于缺口根部应变值,采用等效应变法进行疲劳寿命预测,预测结果随缺口半径的减小而偏于保守。采用应力梯度法确定有效距离,相同路径下,随着缺口半径的减小有效距离减小;依据该有效距离处的等效应变进行疲劳寿命预测,总体预测结果较为分散且偏于不安全。基于实验及有限元模拟结果,提出了基于应变梯度的有效距离确定的新方法,大部分疲劳寿命预测结果位于2倍分散带内。     

基于小波变换和支持向量机的开关电流电路故障诊断新方法

针对开关电流(Switched current,SI)电路的故障诊断和定位问题，为进一步提高故障诊断准 确率，提出了基于小波变换和粒子群优化(Particle swarm optimization，PSO)支持向量机 (Support vector machine，SVM)的开关电流电路故障诊断新方法。该方法首先对节点电流 信号进行蒙特卡罗分析，然后通过小波分解计算分形维数，再利用核主元分析（Kernel pri ncipal component analysis，KPCA）降低特征值维数，实现最优故障特征的提取。最后通 过PSO SVM完成对各种故障模式的分类。对六阶切比雪夫低通滤波器进行了仿真实验验证， 获取了较高的故障诊断准确率，与其他方法进行比较，实验结果显示了本文方法的优越性。     

电传飞机低阶等效系统频域辨识新方法

针对带有复杂电传飞控系统飞机的飞行品质评估难题，提出了采用Chirp-Z方法将时域信号变换至频域，并在此基础上利用频域方程误差法（Equation error method,EEM）和输出误差法（Output error method,OEM）相结合辨识电传飞机低阶等效系统（Low order equivalent system,LOES）参数的新方法，并以低阶等效系统辨识的标准算例（F-14飞机经典算例）进行验算。结果表明本文所提出的低阶等效系统辨识新方法正确、辨识精度高，可以应用于工程实践。     

Semi-stochastic modification of second-order radial derivative of Abel–Poisson’s formula for validating satellite gravity gradiometry data

The geoid can be used to validate the satellite gravity gradiometry data. Validation of such data is important prior to their downward continuation because of amplification of the data errors through this process. In this paper, the second-order radial derivative of Abel–Poisson’s formula is modified stochastically to reduce the effect of the far-zone geoid and generate the second-order radial derivative of geopotential at 250 km level. The numerical studies over Fennoscandia show that this method yields the gradients with an error of 10 mE and when the long wavelength of geoid is removed from the estimator and restored after the computations (remove–compute–restore) the error will be in 1 mE level. We name this method semi-stochastic modification. The best case scenario is found when the degree of modification of the integral formula is 200 and the long wavelength geoid to degree 100 is removed and restored. In this case the geoid should have a resolution of 15′ × 15′ and the integration should be performed over a cap size of 3°.